• Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
  • Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
  • Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
  • Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
  • Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
  • Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts

Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts

Condition: New
Certification: RoHS, ISO9001
Standard: ASTM, GB
Customized: Customized
Material: Metal
Application: Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Samples:
US$ 100/Piece 1 Piece(Min.Order)
| Request Sample
Diamond Member Since 2019

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company
  • Overview
  • Product Description
  • Application
  • FAQ
  • Contact us
Overview

Basic Info.

Model NO.
DX51D
Transport Package
Standard Seaworthy Package
Trademark
Mesco Steel
Origin
China
HS Code
721933
Production Capacity
2000tons/Month

Product Description

Product Description

What is DACROMET

DACROMET® is an aqueous solution comprising zinc in flake phase, aluminium metal powder and inorganic compound. It is normally treated by dip and spin coating of this aqueous solution followed by heat-treatment at a relatively high, that is, about 300°C temperature. As a result, 7-8 μm thick coating is formed by drying and curing during the hot air drying process. Metal zinc and aluminium, which constitute the coated film, can protect steel via self-sacrificing, namely, by inhibiting the corrosion of a given steel due to the electric activity of highly ionisable metal zinc. Here, the chromic acid in a polymerized state can control and inhibit the self-sacrificing of metal zinc thus serving the role of a binder while also establishing the passivation of coating, which then leads to inhibition of chemical reaction between zinc and iron and accordingly reduces the speed of corrosive progress, thus exhibiting high corrosion resistance. In addition, the zinc, aluminium flake and metal oxide, which are of multi-layered structures, can protect the surface of iron alternatively thus functioning as a barrier against external corrosive factors thereby exhibiting superiority in corrosion resistance.

Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts

1. Superior corrosion resistance: The thickness of the Dacromet film is only 4-8μm, but its rust-preventing effect is 7-10 times higher than that of traditional electro-galvanizing, hot-dip galvanizing or coating. The standard parts and pipe fittings treated by the Dacromet coating process have not experienced red rust after more than 1200 hours of smoke resistance test;
2. High heat resistance: Dacromet's heat-resistant temperature can reach above 300 °C, but the traditional galvanizing process, when the temperature reaches 100 °C, has been scrapped;3. Good permeability: Due to the electrostatic shielding effect, it is difficult to plate zinc on the deep holes, slits, and inner walls of the pipe, so that the above parts of the workpiece cannot be protected by electroplating. And Dacromet can enter these parts of the workpiece to form a Dacromet coating
4. No pollution: During the whole process of production and processing and workpiece coating, Dacromet will not produce environmentally polluted wastewater and waste gas, and it will not require three wastes to be treated, which will reduce the treatment cost.

Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
Application
Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts
Dacromet Coating Hot DIP Galvanized Metal Stamping Hardware Parts

 

FAQ

 

1.Q: How long is your delivery time?
A: Within 7-15 days after receiving the deposit or L/C at sight. Longer lead time will be required for special designed products.
2.Q: Do you provide samples ? is it free or extra charged?
A:Surely, product sample is complimentary but the delivery fee will be covered by our customers.
3.Q:What's your payment terms?
A:Our Payment trems will be
(1) 100% T/T
(2) 30% in advance,others before shipment.
4. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

5.what can you buy from us?
Excellent quality steel at competitive prices

 

Contact us

If you are interested in our products, please send us a specific inquiry.Including but not limited to product name,thickness,width,quantity,coating,delivery time,destination port and application.
We will give you the preference of our offer.

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now