Stainless Steel Clad Plates for Petroleum, Chemical Papermaking Industry Rina

• Product Type: Sheet
• Carbon Content: Low Carbon
• Base Metal: 304 316L 1Cr13
• Cladding Metal: Q235B Q345r Q245r
• Transport Package: Standard Seaworthy Package
• Specification: Thickness 3-70mm Width 4000mm Length 15000mm
• Model NO.: Q235B Q345R Q245R
• Trademark: Mescosteel
• Origin: China
• HS Code: 7219900000
• Production Capacity: 100000

Product Description

Product Description

Stainless steel clad plate is a new type of energy saving and environmental protection material, which is based on carbon steel and stainless steel cladding through the most advanced hot rolling composite technology, to achieve the complete metallurgical combination of base and cladding.

The strength and mechanical properties of the material are ensured by the base layer, and the corrosion resistance, wear resistance and diamagnetism of the material are ensured by the composite layer.
The product implements GB/T8165-2008 and NB/T47002-2019.
 

Base Metal	Cladding Metal
304	Q235B
316L	Q345R
1Cr13	Q345R

The base material of stainless steel clad plate is the normal carbon steel, low alloy steel and container plate such as Q235B, Q345R, Q245R. The bridge steel, shipbuilding steel, weathering steel, pipeline steel and other special steel plates can also be the base metal.
The cladding materials can be used in any  stainless steel such as 304, 316L, 1Cr13 and etc.


Stainless Steel Clad Plates Characteristics



As a new type of material, stainless steel clad plate fully realizes the complementary advantages of materials, which not only has the corrosion resistance, wear resistance, diamagnetism and decoration of composite material, but also has good weldability, formability, tensile ductility and thermal conductivity of the substrate.

Test Report


The stainless steel composite plate is implemented by the GB/T8165-2008 national quality standard, which stipulates that the combination rate is ≥95% , ≥98% and 100% . The interfacial shear strength of Class II and III products is 200Mpa, and Class I products are 210Mpa. And through various detection tests,
The shear strength of the composite plate produced by our company can reach an average of more than 300Mpa, which is much higher than the national standard (210Mpa) and other manufacturers.

Application

Bridge construction


Stainless steel and bridge steel composite plate have the good corrosion resistance of laminated stainless steel and the high strength and high toughness of base bridge steel, replacing a single bridge steel plate, can significantly improve the corrosion resistance and service life of bridge deck structure, and will be widely used

 

Petroleum, chemical industry


High sulfur, high salt, high acidity value of crude oil refining, its main refining equipment such as: atmospheric and vacuum tower, absorption tower, fractionation tower, stability tower can be used to replace the ordinary container steel plate to manufacture, the refining industry must meet the high corrosion of high sulfur crude oil challenges to ensure the necessary life.

 

Wine, food, pharmaceutical industries

Ethanol, olive oil, beer, pharmaceutical and other biochemical engineering on the cleanliness of the storage container requirements are very high, so commonly used pure stainless steel manufacturing, but its high engineering cost so that many biochemical enterprises look and feel afraid to step, and the advent of stainless steel composite plate greatly solved their dilemma, stainless steel composite plate more and more popular.

Power sector

Each unit of the thermal power plant needs about 200 ~ 400 tons of composite steel plate, mainly used in silos, hoppers and other parts, in recent years due to the improvement of environmental protection requirements, reduce the SO2 in the air of the flue gas desulfurization project, metal composite steel plate will become the preferred material for thermal power plants, each flue gas desulfurization and chimney lining corrosion resistant materials need composite plate.

Why Choose us??

The 2nd&3rd&4th Northeast Steel Structure Industry Chain  Alliance (NSSICA) was held by MESCO.

The concil member of CSECA & vice president enterprise.  Authorized China Top 50 Coating Steel Enterprise by  LGMISteel Media in 2019.
Authorized China Top 20 Integrity Enterprise by LGMI Steel  Media in 2019.

MESCO specialises in providing the solution of the industrial  raw materials based on the steel.